This kit includes a 2000 or 1500 lb-ft electric clutch and will bolt to a #2 bellhousing and 11.5” flywheel or a #3 bellhousing and 10” flywheel and is available with either 12 or 24 VDC actuation.
The kit is compact and only adds 10” from the face of the bellhousing.
Quick to install and simple to operate - bolt the adapter plate to the flywheel and the clutch housing to the bellhousing, bolt the pump on, wire in a toggle switch and you are ready to rock and roll.
MER cannot guarantee torsional compatibility with unverified rotating components in an assembly. We highly recommend a qualified engineer review the mass elastic data of all rotating components of the final assembly to assure against premature failure. Neither MER or the engine manufacturer will warranty engine or associated equipment failures due to torsional incompatibility in absence of a Torsional Vibration Analysis (TVA).