MG18 Marine Generator Series

MG18 Marine Generator Series

The MG18 Genset offers a seamless transition from Tier 2 to Tier 3 Marine by maintaining the same footprint and hard mounting points with only the slight performance changes from the Tier 2 engine.

Description

Unsurpassed Quality & Reliability
– BOLLARD Generators are designed and built in the USA specifically for the rugged conditions of commercial use. The expected time between overhauls on the BOLLARD packaged generator set is 20 to 50 thousand hours.

High-Efficiency Motor Starting
-High-efficiency compact generator with dedicated secondary excitation windings for unsurpassed voltage control, independent AVR power supply & 300% sustained short circuit capacity as standard equipment.

Emissions
– iT-IV Mechanical EPA Certified. CARB, EU and MOC Certified. The MG18 Gen-Set offers a seamless transition from Tier 2 to Tier 3 Marine by maintaining the same footprint and hard mounting points with only the slight performance changes from the Tier 2 engine.

Radiator, Heat Exchanger Or Keel Cooling Compatibility

– Flexible cooling systems for reliability in any adverse condition or application.

Heavy Duty Structural Steel Base Frame
– For ease of installation, added structural integrity, superior vibration dampening, safety and durability.

Reduced Noise
– Low vibration & noise due to high mass flywheel, crank-center mounted vibration isolators, mass loaded & stiffened skids, and denoised engine.

Water Jacketed Exhaust Manifold and Expansion Tank
– Provides low engine room temperatures and greatly reduces fire hazard

Controls, Gauges & Instrumentation
– Customizable with a wide variety of sender & control options as well as custom in-house fabrication. Generator packages can be tailor-made to fit any application.

Optional SEADRIVE Front Power Take Off System
– The ultimate PTO. Ultrashort heavy duty housing, pre-aligned, easy to install, service friendly and available with or without a clutch. Integrated torsional coupling eliminates vibration and extends engine life.

Optional Heavy Duty Air Intake Filtration
– For increased performance and extended engine life.

 

Download the brochure

Engine ModelMG88
Engine TypeIn Line | 4 Cylinder | Diesel
Displacement – L (cu.in)1.99 (122)
Bore x Stroke – mm (in)83 (3.27) x 92.4 (36.4)
AspirationNaturally Aspirated
Oil Sump Capacity – qts (L)8.03 (7.6)
Emission RegulationTier 3 Marine
Prime – 60hz, 1800RPM (HP)18 kW (24.1)
Standby – 60hz, 1800RPM (HP)19.8kW (29.2)
Motor Starting Range – HP6.04-14.6 (Code G Motor@ 208 VAC)
Voltage Regulation+/-1%
Starter12v | 14 kW
Alternator12v | 40 Amp
Operating Angle – Degrees20 (Constant) | 30 (Intermittent)
Dry Weight – lbs440.9 (Engine only, call for details)
Length x Width x Height – in(Call for details)

 

Load Performance25%50%75%100%
Load in kW4.59.0013.5118.02
Pounds Per Hour2.374.757.129.5
Gallons Per Hour.335.6691.001.34
kWe Per Gallons Per Hour13.4613.4613.4613.46
Pounds Per Gallon7.17.17.17.1
Continuous kW Output1818
Horsepower At Load6.112.218.324.4
Horsepower Continuous24.411.711.711.7
Pounds Per Horsepower Per Hour.386.386.386.386