Description
Standard Equipment
- John Deere 1800 RPM, EPA/CARB certified Tier 3 marine diesel engines
- Marathon motor start generator rated 80C/40C for maximum electrical efficiency
- Dedicated PMG excitation with 300% short circuit protection and VFD compatibility
- Digital parallelable automatic voltage regulator – .25% voltage regulation no load to full load
- Remote start digital control panel with J1939 diagnostics and 3′ extension harness
- Automatic safety shutdowns for low oil pressure, high water temp and over speed
- Structural steel welded base frame with vertical and horizontal gusset supports
- Coast Guard approved JIC fuel supply and return line fittings installed
- Isoflex™ anti-vibration mounts between engine/generator and base frame
- Closed crankcase engine ventilation filter system
- Dry element cleanable combination air intake filter/intake silencer
- Dry exhaust elbow with mating flange, high temperature gasket and stainless hardware
- Coolant recovery bottle
- Starter and alternator 12V std on 40kW-150kW, 24V std 200kW-385kW
- Imron™ two-part epoxy marine paint for maximum corrosion protection
- Stainless steel fasteners and powder coated accessory brackets
- All generators are calibrated, and load tested under full load before shipment
- Single phase 4 wire generators are oversized to allow full load single phase output 105/40c @ 1.0PF
- Three phase generators are 12 lead reconnectable voltage, 50Hz or 60HZ
- Heat exchanger cooled engines include bronze gear driven raw water pumps and Cu/Ni HE cores
- Stainless steel water injected exhaust elbows are Included with HE cooled engines
