Drawings or pictures may show non-standard equipment.

BOLLARD™ 9kW Marine Generator

High-efficiency compact generators.

Keel Cooled, Heat Exchange, or Radiator Compatible.

Engine model: Isuzu 3CH1

EPA certified Tier 4 Marine, CARB, EU & MOC


Unsurpassed Quality & Reliability – BOLLARD™ Generators are designed and built in the USA specifically for the rugged conditions of commercial use with an expected time between overhauls of 20 – 50 thousand hours.

High Efficiency – Standard on each genset are heavy Duty windings engineered for 80 deg. C rise of 40 deg. C ambient yield extended insulation service life, high electrical efficiency for maximum fuel economy, and superior motor starting at all voltages. Dedicated auxiliary excitation windings are standard, resulting in higher motor starting together with 300% sustained short circuit capacity in a compact design.

Low Emissions – EPA certified Final Tier 4, they meet the lowest emissions levels available on the market without exhaust aftertreatment. Which means reduced maintenance and operating costs while preserving air and water quality.

Premium Marine Grade Protection – Imron™ 2 part marine epoxy overcoat on the engine, generator and base frame. Accessory brackets are typically powder coated, and fasteners are primarily stainless steel to protect your investment from the harsh marine environment.

Heavy Duty Air Intake Filtration & Silencing – For increased performance, extended engine life, and quiet operation.

Heavy Duty Structural Steel Base Frame – For ease of installation, added structural integrity, safety and durability. Superior vibration and noise dampening with a high mass flywheel, polyurethane vibration isolators, mass loaded & stiffened base frame, and de-noised engine.

Water Jacketed Exhaust Manifold and Expansion Tank provides low engine room temperatures and greatly reduces fire hazard.

Controls, Gauges & Instrumentation – Enclosed prewired digital auto-start control panel with push button start/stop. Safety shutdowns are programmed for high water temp, low oil pressure and overspeed.

Download the brochure


Engine Model 3CH1
Engine Type In Line | 4 Cycle | 3 Cylinder | Diesel
Displacement – L (cu.in) 1.3 (79.33)
Bore x Stroke – mm (in) 80 (3.14) x 84 (3.30)
Aspiration Naturally Aspirated
Oil Sump Capacity – qts (L) 3.5 (3.4L)
Emission Regulation US EPA Tier 4 Certified
Prime – 60hz, 1800RPM (HP) 9kW (12.06)
Standby – 60hz, 1800RPM (HP) 9kW (13.26)
Motor Starting Range – HP 3.6-8.6 (Code G Motor @ 208 VAC)
Voltage Regulation +/-1%
Starter 12v | 1.4kW
Alternator 12v | 40 Amp
Operating Angle – Degrees 20 (Constant) | 30 (Intermittent)
Dry Weight – lbs (see details on brochure)
Length x Width x Height – in (see details on brochure)