BOLLARD™ 40kW Platinum Marine Generator

Drawings or pictures may show non-standard equipment.

BOLLARD™ 40kW Marine Generator

MGP40

Designed & built in the US specifically for commercial use.

Customizable to meet your needs.

Description

Unsurpassed Quality & Reliability
BOLLARD™ Generators are designed and built in the USA specifically for the rugged conditions of commercial use. The expected time between overhauls on the BOLLARD packaged generator set is 20 to 50 thousand hours.

Radiator, Heat Exchanger Or Keel Cooling Compatibility
Flexible cooling systems for reliability in any adverse condition or application.

Heavy Duty Structural Steel Base Frame
For ease of installation, added structural integrity, superior vibration dampening, safety and durability.

Reduced Noise
Low vibration & noise due to a high mass flywheel, crank-center mounted vibration isolators, mass loaded & stiffened skids, and denoised engine.

Water Jacketed Exhaust Manifold and Expansion Tank
Provides low engine room temperatures and greatly reduces fire hazard.

Controls, Gauges & Instrumentation
Customizable with a wide variety of sender & control options as well as custom in-house fabrication. Generator packages can be tailor-made to fit any application.

Optional SEADRIVE Front Power Take Off System
The ultimate PTO. Ultrashort heavy duty housing, pre-aligned, easy to install, service friendly and available with or without a clutch. Integrated torsional coupling eliminates vibration and extends engine life.

Optional Heavy Duty Air Intake Filtration
For increased performance and extended engine life.

BOLLARD™ Model MGP40
Engine TypeIn-Line | 4 Cycle |  4 Cylinder | Diesel
Displacement - L (cu.in)4.5 (274.6)
Bore x Stroke - mm (in)106 (4.17) x 127 (5.00)
AspirationTurbocharged
Oil Sump Capacity - qts (L)19 (18)
Emission RegulationEPA Commercial Marine Tier 3
Prime - 60hz, 1800RPM (HP)40kW (68.5
Standby - 60hz, 1800RPM(HP)45kW (73.7)
Motor Starting Range - HP23.5 - 39.75 (Code G Motor @ 208VAC)
Voltage Regulation+/-1%
Starter12v | 4.5 kW
Alternator12v | 75 Amp
Operating Angle - Degrees20 (Constant) | 30 (Intermittent)
Dry Weight - lbs1992 (engine, 287 gen, skid)
Length x Width x Height - in(See details in brochure)
 

Providing products & solutions to the marine industry since 1964!